Phoenix Service Software Crackeado, Para flashear x USB los nuevos nokia X3, X6, y mas

software para flashear cualquier nokia BB5 x USB, incluyendo los nuevos
SL3.. solo hay que tener bien instalados los flashes para que reconozca
los archivos porque no se puede cargar manualmente los archivos MCU PPM
CNT.. (detallare eso mas adelante para los que necesiten)

PHOENIX SERVICE SOFTWARE VERSION 2010.24.003.43250

1.Change History:

• Version 1 2.7.2010 Initial version

Please note:

•
This version contains the latest Tucson components. Therefore it is not
necessary to use Tucson Add-On Installation Package v.2010_10_9_41709.
•
Improvements concerning the case where phone models request SIM Lock
data to be written in wrong format have been included. Therefore it is
not necessary to use special DLL´s or Tucson Add-On Components for SIM
Lock versions anymore.
• For all Tucson activities, use of components
included in this release is enough, please do not use any previously
released Tucson – related dll´s or add on packages

Main component versions in the release:

• DK2 Driver Version 07.14.0.25
• Nokia Connectivity Cable USB Driver Version 7.1.27.0
• Flash Update Package 10.20.001
• FLS-x Drivers Version 2.09.28

2. Main changes & error corrections from previous version 2010.12.11.42838

New Products added
•
RM-684, RM-718, RM-693, RX-83, RX-85, RM-702, RM-688, RM-694, RM-695,
RM-709, RM-639, RM-683, RM-666, RM-667, RM-712, RM-704, RM-711, RM-675,
RH-125, RM-692

New features
• Connection refresh – button added directly to Phoenix
UI. Refreshing connection is now possible without opening FUSE
Connection Manager separately, use of older “manual CU-4 initialization”
– menu is not needed if CU-4 is paired with the connection and
“refresh” – function is used.
• New version of FUSE connection Manager
• New version of Flash Update Package
• Phoenix can now use product codes which contain alpha characters in addition to numbers

Error Corrections & changes

• Improvements concerning the case where phone models request SIM Lock data to be written in wrong format have been included.
• EM Calibration and RSSI Reading improvements for RM-497 and products using same engine
• Improvements for ALS Calibration in Light Swap Modules
• Improvements to FM radio control
• Improvements to touch display testing
• Improvements to label printing alignment, displaying factory list and label printer setup
• Correction to problems when DP path contains diacritical signs
• Improvements to proximity sensor UI size
• Flashing improvements for RX-51
• Improvements to phone information reading
• Improvements for CU-4 use and connectivity

• Some obsolete product specific testing menu’s removed from all products in package

- PPC analyzer
- PPC online
- PPC reporting
- FPS-8C Flash
- FPS-8C Flash Pro
- FPS-11 Flash
- FPS-8C maintenance
- Bluetooth flasher
- Flash memory test
- WIMAX Autotune
- Show stored tunings
- PPC/Fault log archive & send
- Certificate backup tool

3. Known errors & limitations

• Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
• Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore
•
If you install old DCT-4 data packages, Flash Update Package File
installation path may be wrong. This is caused by very old DCT-4 data
packages which contain Flash Update Package and overwrite current
information during installation. If you experience problems when
updating FPS-x prommers, please check that Phoenix
“Prommer maintenance” is looking for the files from the correct
location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If
not, Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
• Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
•
FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21
prommer with new HW version is needed to correct this, and it is
estimated to be available by the end of 2010
• Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
• RX-51 flashing does not work when CU-4 is used
• When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the first time. Please wait patiently; Phoenix will start after configuration is finished.
•
When using Data Package download functions with online connection,
download times may occasionally be long. This is not caused by Phoenix
(or Care Suite). The download speed from online servers is occasionally
is known to be slow, depending on how data is buffered on caching
servers.
• Note concerning the installation and use with Administrator and User rights

- If you install Phoenix, start Phoenix and configure connections from FUSE connection manager as Administrator, you may not be able to start Phoenix after you log off and try to use Phoenix with User Rights afterwards

• If you experience the above mentioned problem:

- Log on as Administrator
- Deleted Fuse folder and its contents from: C:\Documents and Settings\All Users\Application Data\Nokia\
- After this Fuse’s connection list will be empty and it can be used directly with guest/admin rights.
- This has to be done only once.

• After you close Phoenix, it may not restart. To rectify this:

- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC

• Mass memory content file flashing does not work for all products over USB – FPS-10 or FPS-21 Flash Prommer must be used!

Supported operating systems and user rights

Windows XP Service Pack 1 or higher

When installing Phoenix into Win XP you must have local admin rights.

When using in Win XP, user must have power user rights.

For HW & Tool requirements please refer to to Recommended hardware for PC.
For
information on product specific data packages, tools and instructions
please refer to service manuals and technical bulletins.
If you are installing this version of Phoenix on a new Imaged PC, and you are using an FLS-4S or FLS-5 during the install, then install the FLS-X drivers first.



ca subo un tutorial para flashear con PHOENIX..

si alguien tiene algun inconveniente en la instalacion o el flasheo que me diga...






Flasheo por Cable USB con Phoenix
Para
algunos modelos hay que tener en cuenta cual es el RM que tiene la
versión más alta, por ejemplo para un 5200 que es RM-181 igual le
cargamos el RM-174 porque es el que trae la versión mas alta la v7.20)
Por ejemplo para flashear un 2730 necesitamos tener instalados los flashes primero y saber el RM correspondiente..

Primero fíjense que debe decir NO CONNECTION..



Click en Menú File, luego en submenú Open product



elegimos el RM del cel que queremos flashear (acá es donde definimos el modelo)



Luego click en el Menu Flashing , submenú Firmware Update, y luego click en el botoncito Product code..




Elegimos un código de producto que diga “Euro C” , “Euro1”, “Euro AG” o “Amer L” para que tenga español.





Luego
1 Marcamos la opción dead USB
2 Hacemos click en Refurbish
3
Conectamos el teléfono apagado al cable USB y presionamos el power para
que reconozca y empiece el flasheo.. al finalizar el Flasheo el
programa da un aviso y teléfono se enciende..



http://rapidshare.com/#!download|831l3|405412662|Phoenix_Service_Software_2010.24.003.43250_Cracked.rar|101635

muchas gracias por el programa

hey muchas gracias

y donde esta el programa

lo busco ?
puedes agregar un link valido por favor....

andresmm escribió:muchas gracias por el programa

como lo bajo? donde esta el programa?

garcias amigo pero no encuentro el programa

https://rapidshare.com/#!download|831l3|405412662|Phoenix_Service_Software_2010.24.003.43250_Cracked.rar|101635

ahi estA

dnd se encuentra el programas

dele clip al enlaze de arriba de no poder bajarlo me dice.

o escriba esto link en su buscador el de aqui abajo-ok

https://rapidshare.com/#!download|831l3|405412662|Phoenix_Service_Software_2010.24.003.43250_Cracked.rar|101635